Enter the password as well as the login name or e-mail address.
Note
Depending on the setting on the photo sharing site, entering the password may not be
necessary.
14.
Press the left Function button.
The machine accesses on the photo sharing site, then your account is confirmed.
After the confirmation of account is complete, the confirmation screen to save the login name or
e-mail address and password is displayed.
15.
Use the
button to select the setting, then press the OK button.
The account registration is complete.
Resetting the Web Service Settings
This function resets all web service settings.
Reset the web service settings following the procedure below.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Select
Web service on the HOME screen.
LCD and Operation Panel
3.
Select
Web service setup, then press the OK button.
4.
Use the
button to select Reset Web service setup, then press the OK button.
The confirmation screen is displayed.
5.
Use the
button to select Yes, then press the OK button.
The web service setting is reset.
Page top