Canon PIXMA MG4200 Series On-Screen Manual page 480

Home > Overview of the Machine
Settings > Printing Out Network Setting Information
N022
Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Load a sheet of A4 or Letter-sized plain paper.
Loading Paper
3.
Select Setup on the HOME screen.
LCD and Operation Panel
The menu screen is displayed.
4.
Select Device settings, then use the OK button to confirm the selection.
5.
Use the button to select LAN settings, then use the OK button to confirm the
selection.
6.
Use the button to select Confirm LAN settings, then use the OK button to
confirm the selection.
7.
Use the button to select Print LAN details, then use the OK button to confirm
the selection.
8.
Use the button to select Yes, then use the OK button to start printing.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Communication
Mode
Channel
Encryption
> About Network Communication
Explanations of the item
Wireless LAN
Status of the Wireless LAN
MAC Address
SSID
Communication Mode
Channel
Method of the Encryption
> Changing and Confirming Network
Setting
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN
Infrastructure
XX (1 to 13)
none/WEP/TKIP/AES