Canon PIXMA MG4200 Series On-Screen Manual page 160

Home > Overview of the Machine
C079
Removing the Memory Card
Important
If you used the card slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the machine.
Setting Up the Card Slot as the Memory Card Drive of the Computer
1.
Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is protruding and remove it straightforward from the machine.
Important
Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the Access lamp is flashing, the data saved on the
memory card can be damaged.
> Inserting the Memory Card > Removing the Memory Card
Page top