Canon PIXMA MG4200 Series On-Screen Manual page 820

Home > Copying > Two-Sided Copying
U038
Two-Sided Copying
When you select 2-sided for 2-sidedPrintSetting in Standard copy, you can copy two original pages onto
the both sides of a single sheet of paper.
Press the right Function button to select the stapling side.
When Portrait is selected for Orientation
Long-side stapling
When Landscp. is selected for Orientation
Long-side stapling
After selecting the stapling side and press the OK button, you can select whether you use the preview
screen. If you select ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set the
print quality to Standard, then try copying again. If the problem is not resolved, set the print quality to
Fast and try copying again.
Two-sided copy setting can be used in combination with 2-on-1 copy or 4-on-1 copy when Standard
copy is selected.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a
single-sided copy.
When checking the orientation:
When you are using the preview screen, the screen below is displayed so that you can check the
orientation.
Short-side stapling
Short-side stapling