Overview; Order Codes; Connections; Power - SENSY WIRELESS-T24-HA User Manual

1. OVERVIEW

The WIRELESS-T24-HA is an advanced handheld display. This allows wireless remote viewing of multiple inputs
such as strain gauge or voltage etc. using 2.4GHz radio.
The WIRELESS-T24-HA also performs the function of optionally waking the remote modules when it is
turned on and sending them to deep sleep mode when it is turned off.
The handheld can operate in two modes. The operation of the buttons and the automatic sleep/wake functions
are dependent on these modes.
Result Mode
This is the default mode in which multiple transmitter modules are used to create a result which is displayed.
Currently the WIRELESS-T24-HA only provides a sum of the remote modules but this function may be added to
in future versions. Although the handheld usually shows the result (sum) there is an option of viewing the discrete
values that make up the result.
Item Mode
In this mode each transmitter module is treated as a separate reading and the handheld is used to cycle through
the available items and the value of each can be viewed.
1.1.

Order Codes

WIRELESS-T24-HA
Handheld display for use with multiple transmitters and with advanced functionality.
1.2.

Connections

1.2.1. Power

The handheld module is powered by two alkaline AA batteries.
For battery information please refer to
Due to the higher voltage requirements of this module NiMh and NiCad batteries are not recommended.
MA-WIRELESS-T24-HA_EN.docx
Appendix D – Battery Selection
Page 2 on 18 Rev: 08/02/2017