Toro 03626 Installation Instructions page 4

4
Installing the Small Covers
Parts needed for this procedure:
1 Right cover
1 Left cover
1 Lower left cover
1 Lower right cover
1 Rear cage cover
Procedure
Note:
For the small covers, do not separate the hoop and hook closure straps. Use the whole cover for
positioning.
1. Position and ensure the location of the cover before peeling off the film for the adhesive
2. Peel the film off of the adhesive and place the cover in position
3. Repeat this for all of the small covers.
1. Right cover
2. Rear cage cover
3. Left cover
(Figure
Figure 4
4. Lower left cover
5. Lower right cover
4
(Figure
4).
4).
g295831