Page 3
The remote Signaling Indicator is activated directly from the detector using the detection line’s power without a need for auxiliary power sources. The TFL-1N and TFL-1AN can be connected to a single detector or to a group of detectors. When activated, the Remote Signaling Indicator will flash both its LEDs alternately, thereby drawing attention to a detector that is activated.
Page 6
Flash rate: ..............~1.3 Hz All values are nominal. Specifications are subject to change without prior notice Certification Telefire’s TFL-1N auxiliary signaling indicator for conventional detectors and TFL-1AN auxiliary signaling indicator for addressable detectors have the following approvals: EN 54 Certified •...
Need help?
Do you have a question about the TFL-1N and is the answer not in the manual?
Questions and answers