Densitometer Readout; Previewing - Nikon LS-3510 Software Reference Manual

6-12
Fig. 73
Press the left mouse button over an area of the preview to zoom in. A scan will
be done at maximum resolution. Use the scroll bar or text edit field to change the
focus position. Press the left mouse button over the preview to zoom out again.
You can zoom in and out as you wish. Press the End Focus button to return to the
normal operating mode.

Densitometer Readout

Fig. 74
Fig. 75
This display appears above the preview while the mouse is over the preview
image. It displays the values of the preview image at the mouse position in either
RGB values or CMY percentage.
Fig. 76
Press either the RGB or the CMY button to switch to that display mode for the
densitometer.

Previewing

Fig. 77
When the Preview button is pressed, the plugin will do a preview scan of the
slide. The film type should already be set before pressing this button. If the In
Color checkbox is checked, the plugin will scan a three color preview. Otherwise
it will only scan once with the green filter. For a quick preview, you can do a black
& white preview of a color slide. Please note that a color preview can also be done
of a black & white slide if you wish to capture a color image of a tinted black and
white.
Software Reference for Scanners
The Manual Focus Controls in Manual Focus Mode
The RGB Densitometer Readout
The CMY Densitometer Readout
The Densitometer Display Type Buttons
The Preview Controls
Using the Windows Scanner Plugin