Nikon LS-3510 Software Reference Manual page 47

Using The Macintosh Scanner Plugin
The Command: text edit box allows you to enter scanner commands from
the Technical & Programmer's Reference to test various combinations of scanner
operating conditions that are not included in the standard operating software.
Fig. 46 Command Line
If you are developing your own software, this utility is especially helpful to
determine the effect of certain scanner functions that work 'behind the scenes' in
the plugin. Although the scanner requires commands in upper case only, this
dialog converts all characters to upper case for you by reversing the operation of
the shift key. The Send button issues the command to the scanner and the Read
button will receive data back. Errors are reported next to the Result: text at the
bottom center of the dialog box.
The SCSI and GPIB search buttons are repeated in this box as in the main
dialog. They lead, however, to auxiliary dialogs as shown below.
Fig. 47 SCSI Search Dialog
The SCSI button brings up the pop-up menu Always Find Device, the
default setting where the SCSI bus is searched each time for an LS-3510AF
scanner.
You may optionally 'hardwire' the device to the plugin by setting a specific
address as shown in Figure 49.
Fig. 48 SCSI Search Dialog
Software Reference for Scanners
5-15