Fitting The Unit Bracket - Becker Traffic Assist Z 112 Operating Instructions Manual

>>> GENERAL OPERATION
1
> D
> GB
> F
> I
> E
> P
> NL
> DK
2 3
> S
Suction surface
1
> N
Lever
2
Base
3
> FIN
Fastening screw
4
> TR
Carrier plate
5
Release button
6
> GR
> PL
> CZ
> H
> SK
20

Fitting the unit bracket

6
Note:
Fasten the unit holder such that your
field of vision is not impaired when the
Traffic Assist is installed and ensure that
the unit is outside the deployment area of
the airbag.
Ensure that the electrical connection ca-
ble does not hamper you from accessing
the vehicle's controls.
Clean the attachment surface on the
windscreen to ensure that it is clean and
free of grease. Do not use greasy or soapy
4 5
cleaning agents.
On the windscreen
The unit holder can be attached directly
to the windscreen using the suction mech-
anism.
> With the holder disassembled, place the
fastening screw on the ball of the base
. Then press the carrier plate onto
2
the ball and tighten the fastening screw
slightly.
4
> Select a suitable spot to attach.
> Press the base with its suction sur-
2
face against the windscreen. Turn
1
the unit holder such that the carrier
plate is positioned roughly in the de-
sired viewing direction.
> Press the lever
down.
3
The holder has attached itself firmly to the
windscreen. It can now be adjusted with
precision. In order to remove it, operate
the lever again.
3