Installation Notes - Toa DA-X1000S Instruction Manual

Hide thumbs Also See for DA-X1000S:
Table of Contents

Advertisement

• Please use the specified constant voltage loudspeaker. It may lead to the output power failure when
connecting the loudspeaker beyond the specified voltage.
• There is a filter in front of the apparatus, please clean the filter regularly, if the filter is blocked, it may lead to
abnormal heat dissipation.
• Please use in places where temperature-10~40℃ humidity below 90% RH (no condensation) is present.
• When cleaning the equipment, be sure to break the power switch of the equipment first,then wipe it
with a dry towel, and if you encounter more difficult stains, you can do so in theuse appropriate amount
of neutral cleaning agent to clean the towel. Do not use gasoline,diluent,alcohol and other chemicals ,
otherwise it may causesdeformation, discoloration and other conditions.
•This unit is a professional power amplifier.Professional personnel operation and trial adjustment are required.

5. INSTALLATION NOTES

Attention:
• The attached power cable is special for this equipment.Do not use on other equipment.
• Please install this apparatus into the cabinet,need to ensure that the cabinet is fully ventilated, please remove
all the back cover of the cabinet in advance.
When installing into the cabinet,install on the ventilation panel above size 1U.
• Install to the top and bottom of the cabinet.
Set up and down every 5 units.
Power Amplifier
(5 units)
Power Amplifier
(5 units)
*1 U =44.5 mm( standard size)
When this apparatus is installed other cabinet except our special cabinet,please
use screws with diameter of 5 mm or more than 12 mm in length.
Otherwise, it may lead to personal injury.
ventilation panel
4

Advertisement

Table of Contents
loading

Table of Contents