Layout And Items Supplied; Proper Use; Technical Data - EINHELL TE-AC 24 Silent Original Operating Instructions

then please contact the customer service
workshop.
Do not lose these safety instructions

2. Layout and items supplied

2.1 Layout
1. Intake air fi lter
2. Pressure tank
3. Non-return valve
4. Foot
5. Quick-lock coupling (regulated compressed air)
6. Pressure gauge (for reading the set pressure)
7. Pressure regulator
8. ON/OFF switch
9. Transport handle
10. Safety valve
11. Drainage screw for condensation water
12. Pressure gauge (for reading the vessel pres-
sure)
13. Overload switch
14. Handle screw for fi tting the handle
15. Screw
16. Washer
17. Nut
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anl_SA_TE_AC_24_Silent_SPK8.indb 26 Anl_SA_TE_AC_24_Silent_SPK8.indb 26
GB
Important!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Intake air filter
•
Foot (3x)
•
Transport handle
•
Handle screw for fitting the handle (4x)
•
Screw (3x)
•
Washer (3x)
•
Nut (3x)
•
Original operating instruction with safety in-
formation

3. Proper use

The compressor is designed to generate com-
pressed air for compressed air driven tools.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.
- 26 -
30.08.2022 07:07:10 30.08.2022 07:07:10