Vibration Reduction (Vr) - Nikon CoolPix S10 User Manual

Vibration Reduction (VR)

Vibration reduction compensates for slight hand
movements that can blur pictures when the camera is
zoomed in or when shooting in the dark without the
fl ash. Press the VR button to turn vibration reduction
on and off :
• (Vibration reduction on): Vibration reduction is performed while the shutter-re-
lease button is pressed halfway. The eff ects of vibration reduction are visible in
the monitor. Wait for the display to stabilize before pressing the shutter-release
button the rest of the way down to take the picture.
• Off (no display): Vibration reduction off .
Vibration Reduction
Turn VR off when using a tripod.
Vibration reduction may take a few seconds to activate after the camera recovers from stand-
by ( 10) or the power is turned on. Wait until the display stabilizes before shooting.
Vibration reduction may not produce the desired results at slow shutter speeds.
20
10 10 10