Encoder Streams - Bosch FLEXIDOME panoramic 5100i User Manual

FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
4.4.10

Encoder Streams

When this menu is accessed while the device is recording, the following message appears at
the top of the page: "Recording is currently active. At 'Active profile' the stream profile used
for recording is displayed, and overrules the 'Non-recording profile'."
If the application variant is set to dewarp, more options appear at the top of the page.
You are able to select between:
–
–
–
Stream limits (H.264/H.265)
This option is only available in Video 1 Full Image Circle.
In the dropdown, select the maximum stream resolution as provided per stream.
Stream limits is a mandatory selection to pre-assign the maximum available resolution for each
of the four H.264 / H.265 streams. If a lower resolution is selected, you will be more flexible in
streaming options on the second and third stream. The fourth JPEG stream always shows the
maximum resolution available in the camera.
The stream limits may be automatically balanced to ensure frame rate distribution through all
streams. This is only applicable when the 4 concurrent streams from the device would exceed
the maximum MP capacity at full framerate. The frame rate balanced options distributes
frame rates equally through all streams, preventing the device from going over the MP
capacity.
Dewarping mode
Dewarping options are only available in Video 2 Dewarped view mode and in Video 3 E-PTZ.
Video 2 supports the modes described in the next section, depending on the camera mount
position. The camera mount position is configured in Positioning.
Video 3 only supports E-PTZ.
Click the Dewarping mode drop-down arrow to see the options. The options include:
–
–
–
–
–
–
Stream prioritization
Select the stream that should not drop any frame.
Coding standard
Select the coding standard you want to use for the stream.
Active profile
Active profile shows the profile that is in use and can be set differently per stream
If no edge recording or VRM recording is active, the device switches to the Non-recording
profile. Please refer to section Non-recording profile.
(Only applicable to FLEXIDOME panoramic 5100i: NDS-5703-F360, NDS-5703-F360-GOV and
FLEXIDOME panoramic 5100i IR: NDS-5703-F360LE, NDS-5703-F360LE-GOV)
Bosch Security Systems B.V.
Video 1 Full Image Circle
Video 2 Dewarped view mode
Video 3 E-PTZ
E-PTZ: One independent 16:9 dewarped view that can be treated as a PTZ camera
within the camera's field of view
Quad: Four independent panoramic images are shown. The images can be adjusted
independently on the Live preview
Panoramic: Generates a 180º view for wall mount scenarios (available when wall
mount is selected in the positioning menu)
Double panoramic: Two independent panoramic images are shown. The images can be
adjusted independently on the Live preview
Corridor: Two independent corridor images are shown. The images can be adjusted
independently on the Live preview
Full panoramic: One panoramic image is shown
User manual
Configuration | en
2022-10 | V03 | F.01U.385.628
29