Lens Converter Settings (Lens) - Nikon CoolPix 700 Reference Manual

Lens Converter Settings (LENS)

With the UR-E1 step-up ring (available separately) attached, the
COOLPIX 700 can be used with a variety of lens converters
offering enhanced wide-angle or telephoto photography. The
LENS option can be used to adjust zoom, flash, and other settings
to the optimum values for the following converters (available
separately): the WC-E24 wide-angle lens converter, the TC-E2
telephoto lens converter, and the FC-E8 fisheye lens converter.
The following preset combinations of settings are available in the
LENS menu:
Option
Camera settings adjusted for enhanced
WIDE
wide-angle photography. Flash is dis-
(for WC-E24
abled. Macro close-up can be used at
wide-angle con-
ranges of 8cm (3.1in) or more from the
verter)
lens.
Camera set to
TELEFOTO enhanced telephoto photography. Digi-
(for TC-E2 tal zoom can be set to 2 or 2.5 as
telephoto lens desired. Flash is disabled. Macro-close
converter) up can be used at ranges of 50cm
(20in.) or more from the lens.
Camera settings adjusted to take fisheye
photographs with the four corners of
FISHEYE the frame blacked out, creating a circu-
(for FC-E8 fisheye lar frame. Flash is disabled and focus
lens converter) fixed at an autofocus setting of infinity.
Centerweighted metering is used. Do
not use digital zoom.
The Camera Menus: The M-REC Menu
How it works
2 digital zoom for
These options should only be used when the appropriate lens
converter is attached. When using the camera without a lens
converter, select NORMAL for normal camera operation.
To change the lens converter setting:
1
Turn the mode dial to M-REC.
2
Press the MENU button to display the
shooting menu, then press it again to view
the second page.
3
Using the zoom buttons (
LENS and press the shutter-release but-
ton.
4
Use the zoom buttons (
desired option from the menu shown at
right, then press the shutter-release but-
ton to return to shooting mode.
At settings other than NORMAL, a lens converter icon (
appear in the LCD monitor, and settings will be optimized for the
chosen converter as described at left. Choose NORMAL to cancel
changes to settings and restore normal camera operation.
F O L D E R S
L E N S
A E L O C K
), highlight
B & W
1 U S E R S E T
C A R D F O R M A T
R E S E T
S E T U P
S E T SHUTTER
) to select the
B K
L E N S
N O R M A L
W I D E
T E L E F O T O
F I S H E Y E
S E T S H U T T E R
- 28 -
A L L
) will