Table of Contents
Advertisement
Manual focus
In M-REC mode, focus distance can be se-
lected manually from a list of preset distances
ranging from 0.1m (4in.) to infinity. To set
focus distance manually:
1
Measure the distance to your subject.
2
Turn the mode dial to M-REC.
3
Press the zoom buttons (
holding down the
a focus distance.
Notes
When manual focus is used with the lens converters available separately for
the COOLPIX 700, the actual focus distance may differ from the setting
chosen. Check focus in the LCD monitor when using a lens converter.
Using the Buttons (A-REC, M-REC): Focus Settings
) while
button to select
Focus distance is displayed in the LCD monitor, while the control
panel shows the focus distance together with a flashing
A short focus distance can be used to focus the camera on objects
at the specified distance. Choose a setting of Inf for a focus
distance of infinity. Unlike the autofocus setting of Infinity, manual
infinity allows use of the flash. Manual focus can be cancelled by
pressing the
button.
Focus Distance
Focus distance is measured from the cover that protects the lens.
Focus distance can be shown in either meters or feet. To change the units
used, select CONTROLS from the M-REC menu. To display distances in
feet, check the DIST FT item and press the shutter-release button. If this
item is not checked, distances are displayed in meters.
icon.
- 14 -
Advertisement
Table of Contents
