Nikon CoolPix 2000 User Manual page 92

Storage
When storing the for an extended period, choose a location with a humidity
of under 60% and a temperature of between –10 C (14 F) and +50 C
(122 F).
Cleaning
For optimum results when cleaning the lens or monitor, use a blower to re-
move dust and debris. To remove fingerprints, wipe the lens gently in a circu-
lar motion using a lint-free or specialist lens cleaning cloth. To clean the body,
use a cloth lightly dampened with fresh water and then dry thoroughly.
Do not use alcohol, thinner, or other volatile chemicals.
Avoid Contact with Liquid Crystal
Should the monitor break, care should be taken to avoid injury due to broken
glass and to prevent the liquid crystal from the monitor touching the skin or
entering the eyes or mouth.
Notes on the Monitor
When you frame bright subjects, vertical comet-like streaks that whiten to-
ward either end may appear in the monitor. This phenomenon, known as
"smear," does not appear in the final photograph and does not indicate a
malfunction. Some smearing may appear in movies.
The monitor may contain a few pixels that are always lit or that do not light.
This is a characteristic common to all TFT LCD monitors and does not indicate
a malfunction. Images recorded with the product will not be affected.
82