Service Menu 5 - Keyboard Test - Husqvarna VIKING Designer Jade Service Manual

Key No 2
Test pattern # 2 : Satin 0.8x7 mm Density:0.4.
Key No 3
Test pattern # 3 : Buttonhole
Key No 4
Test pattern # 4 : Banana (7.0 mm)
Key No 5
Test pattern # 5 : G-cleaf
Key No 6
Test pattern # 6 : Full Feed (/)
Key No 7
Test pattern # 7 : No Feed(·)
Key No 8
Test pattern # 8 : Flat Lock 9x5 mm
Service Menu 5
- Keyboard Test
Entering service menu 5.
8 9
1. Press button "
2. The display shows the service menu 5 according
7
to below picture.
6
5
10
8 9
3
4
7
2
To verify the functionality of the keyboard, the keys
6
that is indicated in the display shall be pressed one
at a time.
5
10
1
When a key is pressed and recognized by the
electronics, the corresponding square shall be filled
in the display.
3
If all squares are filled by pressing all the advised
4
keys, the keyboard is OK.
2
When entering this function, all of the LEDs on the
left keypad (sewing head keypad) light up. When all
button are pushed all LEDs turn off and return to the
1
default view of the service menu 1.
".
Service Program
1. : Reverse Button
2. : Start/Stop Button
3. : Speed+ Button
4. : Speed- Button
5. : Thread Cut Button
6. : Fix On/Off Button
7. : Stop Button
8. : Selective Needle Stop Button
9. : Pattern Selection : 1
10. : Pattern Selection : 0
8
7
6
5
4
2
1
11. : Step Next Stitch Button
12. : Font Selection Menu Button
13. : "My Stitches" Menu Button
14. : Blind hem technique button
15. : Buttonhole technique button
9
10
3
11
12
11
13
12
13
14
15
14
27