Step 3: Configure Storage System - Lenovo ThinkSystem DE Series Manual

10. Connect controller B to your network.
11. Validate controller B's network settings by entering controller B's configured IP address in a
browser.
If you lose the connection to controller B, you can use your previously

validated connection to controller A to reestablish connection to controller B
through controller A.

2.5.3. Step 3: Configure storage system

After you have installed the DE6400 or DE6600 hardware, use the System Manager to configure
and manage your storage system.
Before You Begin
• Configure your management ports.
• Verify and record your password and IP addresses.
Steps
1. Connect your controller to a web browser.
2. Use ThinkSystem System Manager to manage your DE6400 or DE6600 series storage system.
Refer to the online help included with System Manager.
If you are cabling your DE6400 and DE6600 for SAS expansion, see
expansion card installation and the
14
For accessing System Manager, use the same
IP addresses that you used to configure your
management ports.
Cabling DE-Series hardware
Maintaining Hardware
for SAS expansion cabling.
for SAS