Lindy 38398 User Manual page 7

User Manual
Choose Use the following IP address, input 192.168.10.200 as IP address, 255.255.255.0 as
Subnet mask, and then click on OK, click on OK again.
Please Note: the IP address of the Computer and the units has to be in the same network segment. As
the Tx's IP address is 192.168.10.10, the Computer's IP should be 192.168.10.X (X contains 1~255 except
10) while Rx's IP address is 192.168.10.11 the Computer's IP should be 192.168.10.X (X contains 1~255
except 11)
3- Type the unit's IP address into a browser to enter into the Web GUI log-in page, default user name
is Admin, password is admin.
Web GUI Menu
Status: Shows Firmware version, IP Address, Subnet Mask, Gateway and MAC Address.
English