Table of Contents
Advertisement
3. Loosen screw 1 and 2 to make the derailleur move slightly away
from the rim in case of the chain rubs the tire.
4. Tighten the screw when the shifter can`t switch to the highest gear.
PREPARING TO RIDE
Checklist
01. Make sure all components especially fasteners and accessories
are tightened. Adjust the height of the handlebar and the seat post.
DO NOT raise it above the safety line.
02. Make sure the brakes can cut off the power supply to the motor,
and whether it is sensitive and reliable.
03. Make sure the front and rear axle nuts are tightened.
04. Make sure the display, brakes and lights can work properly.
05. Make sure the chain is tight.
06. Make sure the pedals and all the connection parts are firm and
would not loose, and whether the crank is flexible without jamming.
07. Check if the tire pressure exceeds the recommended one marking
on the side of tire walls.
08. Make sure the throttle works well without jamming, and whether it
feels tight or loose when pressing the throttle.
09. Make sure the battery has been locked.
10. Check if the total weight the bike carried is higher than 300lbs,
which is the maximum weight capacity of the bike.
— 8 —
Advertisement
Table of Contents
