Special Commands; Ainmode (Scaling Mode) - W.E.ST. SCU-138-P Technical Documentation Manual

5.7 Special commands

5.7.1 AINMODE (Scaling mode)

Command
AINMODE
This command is used to switch over the kind of input scaling.
The AINMODE is used to define the kind of parameterizing of the analogue inputs. The EASY mode
(DEFAULT) supports a simple and application oriented input scaling.
The MATH mode supports the free input scaling by a linear equation. This mode is compatible to our older
modules.
Attention: This command can be executed in the terminal window only. In case of switching back,
DEFAULT data should be reloaded.
Page 29 of 34
Parameter
x x= EASY|MATH
SCU-138-P-2230
Unit
-
Group
TERMINAL
05.06.2020