Technical Specification And Ratings; Technical Specification (In General); Signals And Ratings - Schippmann ebbe und flut User Manual

12. TECHNICAL SPECIFICATION AND RATINGS

12.1 Technical specification (in general):

Power Requirements:
Fuse:
Power Consumption:
Enviroment:
Mains Connection
Net. Weight (without box,power cord):
Dimensions (W x D x H):

12.2 Signals and ratings:

Maximum input voltage at socket (24):
Input impedance at socket (24):
Output impedance at socket (23):
Ratio between output level at socket (23) to
input level at socket (24) in bypass-mode:
Output impedance at socket (21):
Output impedance at socket (20):
Maximum input voltage at socket (17) and (19):
Input impedance at sockets (17) and (19):
Output impedance at sockets (16) and (18):
Ratio between output level at socket (18) to
input level at socket (19) in high-/lowpass-
mode, filter opened/closed, resonance = 0:
Ratio between output level at socket (17) to
l
67
user manual e b b e
u n d
depending (see sticker on rear panel)
100 V~ – 125 V~ /50 Hz – 60 Hz
200 V~ – 250 V~ /50 Hz – 60 Hz
80 mA SloBlo
160 mA SloBlo
max. 15W
Operating, 0 °C – +55 °C
Standart IEC receptable
approx. 6.53 lbs (3.1 kg)
19 x 7.29 x 3.66 inches (483 mm x 185 mm x 93 mm)
f l u t
(200 V~ - 250 V~)
(100 V~ - 125 V~)
30 Vpp (±15 VAC)
14.3 kOhm
1kOhm
-5.6 dB
590 Ohm each
1 KOhm each
50 Vpp (±25 VAC) each
100 kOhm each
590 Ohm each
-10 dB