Table of Contents
Advertisement
7.2 Brief description of the control elements & sockets on the rear panel
0:
fuse – Fuseholder for line fuse type 5 x 20, 80/160 mA SLO-BLO
1:
Power Inlet C8 – Socket for power cord with C7 Outlet
2:
Powerswitch – Power supply switch
3:
[POLARITY] Toggle switch – inverts/swaps CV-input and voltage supply at TIP and RING of
socket (5) in order to provide the use of different pedal types.
4:
LFO OUT/TRIG S&H (Tip/Ring)
te-input
5:
PEDAL
" stereo-socket – for use of passive (volume) pedal or as CV-input (also suitable for
active pedals)
6:
SYNC/SPEED (Tip/Ring) " stereo-socket – LFO-sync input / CV-input for LFO-frequency
7:
TRIG OUT/DYN OUT(Tip/Ring) " stereo-socket – Audiotrigger / dynamic-modulation
voltage
8:
TRIG 1/A(H)R 1 (Tip/Ring) " stereo-socket – Trigger input for envelope AHR 1 / control input
for changing mode of envelope generator (AHR / AR)
9:
TRIG 2/A(H)R 2 (Tip/Ring) " stereo-socket – Trigger input for envelope AHR 2 / control input
for changing mode of envelope generator (AHR / AR)
10:
ATTACK 1/HOLD 1 (Tip/Ring) " stereo-socket – CV-input for attack-time / CV-input for hold-
time of AHR 1
11:
ATTACK 2/HOLD 2 (Tip/Ring) " stereo-socket – CV-input for attack-time / CV-input for hold-
time of AHR 2
12:
AMT 1/Release 1 (Tip/Ring) " stereo-socket – CV-(multiplication) input of envelope amount
/ CV-input for release time of AHR 1
13:
AMT 2/Release 2 (Tip/Ring) " stereo-socket – CV-(multiplication) input of envelope amount
/ CV-input for release time of AHR 2
14:
FREQ 1/RESO 1 (Tip/Ring) " stereo-socket – CV-input for cutoff frequency / CV-input for
reonance of VCF 1
15:
FREQ 2/RESO 2 (Tip/Ring) " stereo-socket – CV-input for cutoff frequency / CV-input for
reonance of VCF 2
l
15
user manual e b b e
u n d
" stereo-socket – provides LFO-waveform output / S&H-ga-
f l u t
Advertisement
Table of Contents
