Map Browsing
Options&Settings menu, tap Map Browsing button to disconnect from the GPS receiver.
Figure 22 – Explore the Map
The
icon identifies your current position. You can use the arrow cursor to move the map. When you have
located the street destination, you can tap that point on the map. A popup menu appears. Tap Go There to
navigate to the selected point.
You can reconnect to GPS, by going to the Options&Settings menu and tapping the GPS Navigation
button.
Walking Mode
kilometers, which is not limited by vehicle constraints, such as one way streets. When creating a Walking
route, it avoids highways or other roads where Walkings would not travel. Voice prompts are deactivated in
this mode.
From the Options&Settings menu, tap the Walking Mode button. You can switch back to Vehicle Mode
by tapping the Vehicle Mode button.
Note: When Walking Mode is selected, Driving Directions, Route Summary, Avoid Roads, and Detour
features are disabled.
You can browse the map without a GPS signal. From the
Walking Mode lets you travel as a Walking, generating a route up to ten
20