To The Hi-Speed Usb Cable - Microtek Medi-5000 Quick Start Manual

Connect Digitizer
To the power cord
A. Connect the power cord to the back of
the digitizer.
B. Plug one end of the power cord into a wall
outlet or other power source.

To the Hi-Speed USB cable

C. Connect one end of the Hi-Speed USB cable to your computer.
D. Connect the other end of the Hi-Speed cable to the digitizer's USB port.
E. Turn the Power switch on the back of the digitizer to
"On", and wait for the lights to stop blinking and stay
on steady.
The digitizer will be detected by your system
automatically.
NOTE: It takes a while for your digitizer to warm up. Do not
turn the digitizer off when your digitizer is in the warming-up
process; otherwise, it may cause serious damage to your
digitizer.
3