Table of Contents
Advertisement
Quick Links
How does the machine connect to the computer?
Answer:
1) Development and debugging: Check "Settings - Developer Options {} - USB
Debugging". If the computer is not connected to the network, you need to install the
driver manually.
2) Copy files to the device memory, etc.:Select the MicroUSB mode in the KT80
device "Settings - USB function routing configuration", and then select the "MTP"
mode in the machine notification bar "USB connection mode".For machines with
USB fingerprints,which exits the use of the fingerprint (the fingerprints occupy USB,
you cannot use the normal USB function),
then the machine notifies the bar that "USB connection mode" selects the "MTP"
mode.
Special:older version machines such as in the first half of 2017 will also be
confirmed the check "Settings - Developer Options {} - USB Debugging" for older
machines.
3）KT50/45Q equipment has charging and USB cables,and pay attention to
distinguishing between customers.
4) Make sure that the computer has installed the relevant drivers so that customers
can check whether there is an uninstalled drivers in the device manager of the
computer after connecting the computer with a USB cable.
How to debug USB?
Answer:
Open mode:Settings - Developer Options - USB Debugging
If you turn on the USB debugging mode,the computer will not work properly (the
win10 network will be installed automatically).Without ADB driver, you can install
the related driver manually.
Android 5.1 system developers choose to display in the default settings, Android 6.0
requires access "Settings - About mobile phone - click on the "version number" 7
times,you can find the developer options in the settings.
Device and computer transmission of data?
Mobile/CE platform
Install drvu update synchronization assistant.
Android platform
1) In the case of normal installation of the driver,you need to select "MTP mode" in
the device drop-down status bar (It has been canceled the mass storage mode "USB
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Speedata KT40Q
Summary of Contents for Speedata KT40Q
- Page 1 How does the machine connect to the computer? Answer: 1) Development and debugging: Check "Settings - Developer Options {} - USB Debugging". If the computer is not connected to the network, you need to install the driver manually. 2) Copy files to the device memory, etc.:Select the MicroUSB mode in the KT80 device "Settings - USB function routing configuration", and then select the "MTP"...
- Page 2 How to take a screenshot? Answer: KT40Q:press (long press 1s)(some system versions support)"power key + F3" at the same time; KT45/KT45Q/KT50/KT55/KT55L、 SD55/60: Press (long press)"power key + volume" at the same time.
- Page 3 6.Prompted to update the binary file and click "continue" 7.Select "nomal" pending restart. You can install terminal software on the device to verify whether root is successful (enter su, enter, $ becomes #root) https://pan.baidu.com/s/1fioZhXoHAtkmzlgM5rzMcg Tools: Link: https://pan.baidu.com/s/1fioZhXoHAtkmzlgM5rzMcgExtraction Code: 225d How to determine if the device is rooted successfully? Answer: Install the Terminal app,such as androidterm.apk or terminal command line.apk.Enter su to enter,$ becomes # that is root,means success.
- Page 4 In the factory test, the button test does not go in on the new model. Answer: Different models, the key value varies greatly in different versions, and the button test UI does not correspond. Solution: Add the escalation key Toast, separate UI outside the judgment. Whether to support the simultaneous use of two telecom cards.
- Page 5 slot) What are the models of communication? Answer: 7 modules: GSM, TD-SCDMA, TD-LTE, WCDMA, FDD-LTE, CDMA 1X, CDMA2000 EVDOCDMA2000 and EVDO are one, CDMA 1X is another. 4G data network access. Answer: 1) In Settings - Traffic Usage - Click on "Operator" - turn on the "Mobile Data Network"...
- Page 6 APN settings (private network settings). Answer: Settings - more - mobile network - APN, add private network APN Now customers prefer the flow card or IoT card. There is a problem that the Internet cannot be accessed after opening the data network. The customer needs to ask the relevant operator to ask for the parameters of the APN.
- Page 7 Power on requires a password Answer: Enter the password of the lock screen that has been set.If you forget, you can restore the factory settings in recovery mode or re-flash Recovery mode factory reset method (operate according to the response model description): Link: https://pan.baidu.com/s/1qmqZw3h4SpMu3cKX4OsUagExtraction...
- Page 8 Differential positioning instructions. Answer: The existing Ublox 8030 differential positioning module,8030 is a custom function, a customized version is required. The device is only an information receiving end in the differential positioning. When the customer asks the device why the difference is not so accurate, it can tell the customer that the differential positioning is a complete system service, including the construction of the software and hardware environment.
Need help?
Do you have a question about the KT40Q and is the answer not in the manual?
Questions and answers