Page 5
KT55 Quick Guide V1.0 DATE: 2016-10-10 Tag processing speed >200/s, Reading distance 0-5m 3.ID card: 13.56MHz Support the second generation ID card to read the complete information and analysis, does not require networking. Power infrared meter reading module, 38kHz modulation frequency,...
KT55 Quick Guide V1.0 DATE: 2016-10-10 Android 5.1 introduction System lock screen If you don’t have a screen lock, you can unlock it, open an app, and view notification. Quick Setup: Touch the screen to the top position and side the notification bar, directly touching the icons setting, but also directly touch the top of the System Setup icon to enter system settings.
KT55 Quick Guide V1.0 DATE: 2016-10-10 Main interface In the main interface, you can observe the state, view the notification, open the application, such as search. Add application shortcuts: : : : Point hold the app icon and then move to the main screen anywhere.
KT55 Quick Guide V1.0 DATE: 2016-10-10 All applications Touch the “All app icon” in the Favorites bar to see all of the apps already installed on your current device. Swipe the screen left or right to see all your apps. Touch the icon to open the app.
KT55 Quick Guide V1.0 DATE: 2016-10-10 Basic application and settings Phone Favorites bar or touch the phone icon in all applications , or slide the screen to the right to enter the dial screen interface can use the phone function.
KT55 Quick Guide V1.0 DATE: 2016-10-10 Camera There are three ways to turn the camera on: the screen lock screen to left, touch the camera application icon, and press the camera shortcut key (on both sides of the screen). Snapshot Mode: Swipe left or right to see more pictures mode.
KT55 Quick Guide V1.0 DATE: 2016-10-10 Set the language The default display language is English. Brush to upgrade the system version or restore the factory settings, the system display the language back to the default settings. Can be put into the local use of telephone card changes, or enter the system settings changes.
KT55 Quick Guide V1.0 DATE: 2016-10-10 A key scan A key scan is also called quick scan. This feature allows you to directly bar code or two- dimensional code scanning, hereinafter referred to as bar code. A key scan settings The device does not open a key by default, you want to use the need to open and set.
KT55 Quick Guide V1.0 DATE: 2016-10-10 Include key-values Include key : in the back of the bar code information display included with the other key, the default is "without warranty key." "With enter key" After the success of the scan with enter carriage return line feed, "with tab key"...
KT55 Quick Guide V1.0 DATE: 2016-10-10 Instructions Use one-touch scan to set the operation steps are as follows: First, a quick scan opens. Please enter the settings accessibility, check the "Scan key reporting" category under the "Enable reported Scan key." You can see the scanning beam by pressing any of the scan keys (the scan key on both sides of the screen).
CUSTOMER SERVICE AND TECHNICAL SUPPORTER Customer service +39-0578-299685 Technical supporter Email info@speedata.it SPEEDATA ITALIA Via Denzlingen 10 , 06062 Città della Pieve (PG) ITALY T +39-0578-299685 F +39-0578-299810 www.speedata.it...
Need help?
Do you have a question about the KT55 and is the answer not in the manual?
Questions and answers