KT45Q Quick Guide V1.0 DATE:2016-04-08 1. 13.56MHz(14443A/B,15693,NFC) RFID 2.UHF 900MHz 3.LF low frequency(125KHz,134.2KHz) FingerPrint optical fingerprint identification PHYSICAL SPEC SIZE 175mm*76mm*28mm BATTERY 5200mAh, 3.8V or 2600mAh,7.4V WORK ENVIRONMENT -20℃~50℃ WORK TEMPERATURE 5%~95%(no condensation) HUMIDITY RANGE Within the scope of operation,all 6 sides can withstand the impact of falling to DROP SPECIFICATION sement floor from 1.5m in height...
KT45Q Quick Guide V1.0 DATE:2016-04-08 1 EXTERNAL STRUCTURE DESCRIPTION Beijing Speedata Technology Co.,Ltd 5/19 1st floor,2nd building, ShangDi No.6 Street 28#, HaiDian District, Beijing 100085,China T:(86)010 8234 6858 F:(86)010 8234 6858w w w . s p e e d a t a . c n...
KT45Q Quick Guide V1.0 DATE:2016-04-08 2 HOME SCREEN Home screen shows some important information, such as missed calls and messages. Touch the shortcut menu to make a call, take photos, check or send messages directly and so on. Beijing Speedata Technology Co.,Ltd 6/19 1st floor,2nd building, ShangDi No.6 Street 28#, HaiDian District, Beijing 100085,China...
KT45Q Quick Guide V1.0 DATE:2016-04-08 2.1 Notification Bar Icons Beijing Speedata Technology Co.,Ltd 7/19 1st floor,2nd building, ShangDi No.6 Street 28#, HaiDian District, Beijing 100085,China T:(86)010 8234 6858 F:(86)010 8234 6858w w w . s p e e d a t a . c n...
KT45Q Quick Guide V1.0 DATE:2016-04-08 3 OPERATION INSTRUCTIONS 3.1 Dialing Click Phone at Home Screen into dial interface. As shown in the figure. You can use the Virtual Dial or press the buttons on device to input number in the input field. Click the number you input to call.
Page 9
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.2 CAMERA Click camera icon to take pictures and do a set with the setting button at the bottom left corner. You can click the direction arrow on the left side to change different scene modes.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.3 Shortcut Menu of Notification Bar Slide down the Notification Bar two times from the top of the device or slide down it one time and click the circular icon at the top right corner, you will see the following interface and you can set Wi-Fi, bluetooth etc.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.4 File Transfer Instructions Make sure there’s a SD card in default card slot, check USB debugging specific process Settings{}Developer optionsUSBdebugging(It’s checked in default). Connect device and PC with USB cable and you will see the first picture after sliding down the Notification Bar.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.5 Main Menu Click Menu in Home Screen, you’ll see the first picture below. All about system apps, settings and installed third-party apps are listed here. Click icon to start it. The screen can’t display completely If the icons are too many that a screen, please slide around to show more.
Page 13
KT45Q Quick Guide V1.0 DATE:2016-04-08 Long press the blank screen, you will see the first picture below. You can click WALLPAPERS to change wallpaper. You can also click WIDGETS seen as the second picture and long press any of it to add it to home screen.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.6 Settings Menu Click Settings in Home Screen, Menu or Notification Bar to enter the following interface. All settings about device are listed here. A total of five classes: WIRELESS & NETWORKS, DEVICE, PERSONAL, ACCOUNT and SYSTEM.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.7 Wireless Network You can surf the net when the device is in wireless network environment. Go into Settings, turn Wi-Fi ON below WIRELESS & NETWORKS. Then the network is available. Choose the hotspot you want to connect directly, input password.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.8 Focus Scanning The cursor is in an input status, the device can scan barcode and input the result to where cursor is by pressingSCAN KEY. Before implement it, you should do a setting. Go into SettingsAccessibility, and check Enable Keyreport Scan just like the pictures below.
KT45Q Quick Guide V1.0 DATE:2016-04-08 3.9 F1 Key on the keyboard You can input numbers, uppercase letters and lowercase letters with hardware keyboard by pressing F1 key to switch. For example, it inputs numbers at present time, you can press F1 key one time and then you can input lowercase letters.
Page 18
More information about this demo and developing code please contact the manufacturer to acquire. 3.10.3 LF KT45Q has two types of LF RFID modules. One’s freq is 134.2KHz(LF1) and the other’s is 125KHz(LF2). The device with LF RFID module is named after a “-LF*”.
KT45Q Quick Guide V1.0 DATE:2016-04-08 4 SPECIAL CUSTOMIZATION INSTRUCTIONS This phone has many reserved port to meet the customization. It can connect with RS232, I2C, RS485 and other interface’s peripherals or some function modules. Please contact the phone manufacturer to get more information.
Need help?
Do you have a question about the KT45Q and is the answer not in the manual?
Questions and answers