Table of Contents
Advertisement
Quick Links
N E W C O E N T E R P R I S E S
INSTALLATION and OPERATION MANUAL FOR
NKT3 COMBINATION COFFEE & TEA BREWER
Model
Width
NKT3
9.5"
Coffee/Tea
WARRANTY
Newco coffee brewers are warranted against defects in workmanship or materials, under normal use, for 90
days from the date of purchase. Brewer parts are warranted against defect for 12 months from date of purchase.
Liability in all events is limited to the purchase price paid and liability under the aforesaid warranty is limited to
replacing or repairing any part or parts which are defective in material or workmanship, and returned to our factory,
shipping cost prepaid. No warranty expressed or implied, other than the aforesaid is made or authorized by Newco
Enterprises, Inc.
Prompt disposition will be made if item proves to be defective, within warranty. Before returning any item, write
or call Newco, or the dealer from whom the product was purchased, giving model number, serial number, and date of
purchase, and describe the nature of the defect. If damage was incurred during transit to you, file claim with the carrier.
Depth
Height
Weight
1 g-718"
40 Ibs
Man Pt No 705885
Voltage
Watts
120
1750
Rel 3-02
Amps
15
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Newco NKT3-NS1
Summary of Contents for Newco NKT3-NS1
- Page 1 Prompt disposition will be made if item proves to be defective, within warranty. Before returning any item, write or call Newco, or the dealer from whom the product was purchased, giving model number, serial number, and date of purchase, and describe the nature of the defect. If damage was incurred during transit to you, file claim with the carrier.
- Page 2 CAUTION: Power to brewer must be OFF before proceeding with plumbing installation. Attach flow/strainer assembly to back of brewer. Strainer inlet will point down. Flush water line before installing brewer. Brewer should be connected to COLD WATER LINE for best operation. Water pressure should be at least 20 Ibs.
- Page 3 14) After water has reached brewing temperature (thermostat will click off and heating noise will stop) turn power switch to the on position. With dispenser in place depress brew start switch and run a cycle of water to remove expanded water from tank. (Note: The brew cycle may be canceled by turning the power switch back to the OFF position.) 15) If desired you may run one cycle to check for the proper temperature setting.
- Page 4 WIRING DIAGRAM Newco Enterprises, Inc. *1735 South River Rd.* P.O. Box 852* St. Charles, MO 63302...
Need help?
Do you have a question about the NKT3-NS1 and is the answer not in the manual?
Questions and answers