Table of Contents
Advertisement
Connection Profile Name:
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
PREVIOUS SCREEN
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Enter basic information about your WAN connection with this screen.
5.
Press the Down arrow key until the editable field labelled Local WAN IP Address is highlighted.
6.
Type the IP Address your ISP gave you. Press Return. The next field Local WAN IP Mask will be highlighted.
7.
Type the Local WAN IP Mask your ISP gave you. Press Return.
8.
Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
Ethernet IP Address:
Ethernet Subnet Mask:
Domain Name:
Primary Domain Name Server:
Default IP Gateway:
IP Address Serving:
Number of Client IP Addresses:
1st Client Address:
PREVIOUS SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.
9.
Press the Down arrow key until the editable field labelled Domain Name is highlighted.
10. Type the Domain Name your ISP gave you. Press Return. The next field Primary Domain Name Server will
be highlighted.
Connection Profile 1: Easy Setup Profile
IP Easy Setup
Easy Setup Profile
Yes
Numbered
0.0.0.0
0.0.0.0
NEXT SCREEN
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
On
100
192.168.1.100
NEXT SCREEN
Easy Setup 7-5
Advertisement
Table of Contents
