Related Manuals for BG Light BLUEDENT XPRESS-R cordless
Summary of Contents for BG Light BLUEDENT XPRESS-R cordless
- Page 1 OPERATING INSTRUCTIONS MANUAL BLUEDENT XPRESS-R cordless Dental LED curing light Ref.#200-009R...
- Page 2 BLUEDENT XPRESS-R cordless LED curing light...
-
Page 3: Table Of Contents
BLUEDENT XPRESS-R cordless LED curing light Thank you for trusting our products! Carefully read this Operating instructions manual before installing and operating the unit to use and maintain it successfully! Save this Operations guide for your reference in the future. -
Page 4: Symbols
BLUEDENT XPRESS-R cordless LED curing light II. SYMBOLS Caution! Indicates the need for the user to consult the instructions for use for important cautionary information such as warnings and precautions that cannot, for a variety of reasons, be presented on the medical device itself. - Page 5 BLUEDENT XPRESS-R cordless LED curing light Serial number Indicates the manufacturer's serial number so that a specific medical device can be identified. Batch code Indicates the manufacturer's batch code so that the batch or lot can be identified. Applied part type B according to electric safety classification Temperature limit Indicates the temperature limits to which the medical device can be safely exposed.
-
Page 6: Safety Precautions
BLUEDENT XPRESS-R cordless LED curing light III. SAFETY PRECAUTIONS GENERAL WARNINGS: BLUEDENT is a Class I accessory to a medical device and it meets the strict requirements of the Medical Devices Regulation - MDR (EU) 2017/745. In order to be used safely for staff and patients, the following rules must be observed: - Do not allow unauthorized and untrained personnel to use the device to avoid risks. - Page 7 BLUEDENT XPRESS-R cordless LED curing light - In accordance with the requirements of MDR (EU) 2017/745, user and / or the patient must report any serious accident that have occurred during us of the device to the manufacturer and the competent authority of the Member State in which the user/patient is established.
- Page 8 BLUEDENT XPRESS-R cordless LED curing light 2. Light radiation BLUEDENT is a source of extremely intense light in the blue range, to which the human eye has a high sensitivity. This results in serious measures to be taken for patients, medical staff and accidentally nearby people, animals and plants.
- Page 9 BLUEDENT XPRESS-R cordless LED curing light 4. Fire safety - Keep the device away from solvents, flammable liquids and powerful heat sources. - Do not expose to direct sunlight. - Do not allow liquids and detergents to enter the device, as this may cause a short circuit and fire or cause potentially dangerous damage.
-
Page 10: Technical Data
BLUEDENT XPRESS-R cordless LED curing light IV. TECHNICAL DATA 1. Operating voltage - 3.7V Li Ion battery type LIR 14500 (800mAh capacity) 2. Charge adaptor: SYS1638-0605-W2E - 110-240VAC / 50-60Hz input voltage - Output: 5V DC / 1.2A micro USB socket - 0.5 A max power consumption... -
Page 11: Complete Set
BLUEDENT XPRESS-R cordless LED curing light V. COMPLETE SET 1. Charge adaptor with micro USB output 5V DC / 1.2A - 1 pc. 2. Cordless handpiece - 1 pc. 3. Battery pack - 1 pc. 4. Barrier sleeves - 50 pc. - Page 12 BLUEDENT XPRESS-R cordless LED curing light The device can be operated during charging. After fully charging the device or at the end of the day, unplug the charging adapter. 3. A new barrier sleeve is placed on the front of the probe before each patient. It is for single use only and is marked with the appropriate sign.
- Page 13 BLUEDENT XPRESS-R cordless LED curing light 5.2 LED module LED module indication: Blinking means that the battery is discharged - there is only 20% charge left, you have the option of 5-25 starts of 10 seconds to full discharge. 6. Choosing timer mode: - SINGLE Press the Start / Stop button - 10 sec.
- Page 14 BLUEDENT XPRESS-R cordless LED curing light 10. Overheating protection The unit is equipped with overheating protection, which is activated if the temperature of the LED module rises up to 50°C. When overheating protection is activated the color ring will blink in yellow next 60sec, then is deactivated until the temperature of the handpiece reaches 35°C.
- Page 15 BLUEDENT XPRESS-R cordless LED curing light When to replace the battery: - at reduced capacity - frequent charging is required; - in case of battery failure. To replace a Li-Ion battery: - Disconnect the adapter from the socket and the USB socket.
-
Page 16: Routine Care And Maintenance
BLUEDENT XPRESS-R cordless LED curing light VI. ROUTINE CARE AND MAINTENANCE 1. Cleaning the emitting tip Clean the emitter glass daily with an alcohol swab dipped in alcohol. Adhesive photocomposite is not allowed - if there is one, it should be carefully removed with a blunt, non- metallic object. -
Page 17: Warranty Conditions
BLUEDENT XPRESS-R cordless LED curing light VIII. WARRANTY CONDITIONS 1. Warranty period of BLUEDENT dental curing light is 24 (twenty four) months from the date of purchase. If date of purchase is not written, warranty starts at date of production. - Page 18 BLUEDENT XPRESS-R cordless LED curing light 4. The manufacturer provides its customers once a year (and in case of a situation - immediately) to check in the company service whether the performance of the devices is within the acceptable limits.
-
Page 19: Service Data
BLUEDENT XPRESS-R cordless LED curing light SERVICE DATA... -
Page 20: Faq
BLUEDENT XPRESS-R cordless LED curing light X. FAQ Problem Solution No response by button starting Fully discharged battery. Need to connect to charger to begin charge. Use only the original adapter type SYS1638-0605-W2E. If button continues not to respond - send the device to service. - Page 21 BLUEDENT XPRESS-R cordless LED curing light higher if light is near dental pulp and is decreased by every layer. Use RAMP mode. Power cord or mains adaptor is Send to service. damaged Entering some liquid into device Send to service.
-
Page 22: Declaration Of Conformity
BLUEDENT XPRESS-R cordless LED curing light XI. DECLARATION OF CONFORMITY ТD 7.2 EU Declaration of conformity TECHNICAL FILE Revision 02 BLUEDENT Developed in conformity with MDR (EU) 2017/745 LED curing light Manufacturer: BG LIGHT LTD SRN: BG-MF-000019812 Address: 155, Vasil Aprilov blvd., 4027 Plovdiv, Bulgaria Tel.: +359 32 644089, +359 888 809256, email: office@bglight.com... - Page 23 MD/1971/4047/2020 from TUV NORD Polska Sp. z o.o. (NB 2274). BG LIGHT LTD maintains data on the provision, evaluation and maintenance of compliance of the medical device, according to the requirements of Annex II "Technical documentation" of MDR (EU) 2017/745.
-
Page 24: Bluedent Data
BLUEDENT XPRESS-R cordless LED curing light XII. BLUEDENT DATA LOT: DATE OF PRODUCTION: DATE OF PURCHASE: Last revision: 01.01.2023 Follow www.bglight.com for updated revision of this Operating instructions manual.
Need help?
Do you have a question about the BLUEDENT XPRESS-R cordless and is the answer not in the manual?
Questions and answers