BLUEDENT XPRESS cordless Dental curing light Thank you for trusting our products! Carefully read this Operating instructions manual before installing and operating the unit to use and maintain it successfully! Save this Operations guide for your reference it in the future.
BLUEDENT XPRESS cordless Dental curing light II. TECHNICAL DATA 1. Operating voltage - 3.7V Li Ion battery 2600mAh capacity) 2. Charge adaptor: SYS1421-0605-W2E - 110-240VAC / 50-60Hz input voltage - Output: 5V DC / 1.2A micro USB socket - 0.5 A max power consumption 3.
BLUEDENT XPRESS cordless Dental curing light III. COMPLETE SET 1. Charge adaptor with micro USB output 5V DC / 1.2A - 1 pc. 2. Cordless handpiece - 1 pc. 3. Battery pack - 1 pc. 4. Barrier sleeves - 50 pc.
Page 5
BLUEDENT XPRESS cordless Dental curing light - The device must not be covered, the cooling openings must not be closed so as not to cause the device to overheat and ignite. - Strong electromagnetic fields in the building can cause interference and malfunction of the device.
Page 6
BLUEDENT XPRESS cordless Dental curing light - no part of the device should be wetted or immersed in water; - the device or any of its parts must not be disassembled while it is connected to the mains! Protect the cables of the appliance from insulation damage and breakage from sharp objects, strong pulling, rodents, chemicals.
BLUEDENT XPRESS cordless Dental curing light Risk of pain, burning of soft tissues. 4. Fire safety - Keep the device away from solvents, flammable liquids and powerful heat sources. - Do not expose to direct sunlight. - Do not allow liquids and detergents to enter the device, as this may cause a short circuit and fire or cause potentially dangerous damage.
Page 8
BLUEDENT XPRESS cordless Dental curing light The device can be operated during charging. After fully charging the device or at the end of the day, unplug the charging adapter. 3. A new barrier sleeve is placed on the front of the probe before each patient. It is for single use only and is marked with the appropriate sign.
Page 9
BLUEDENT XPRESS cordless Dental curing light In HYPER mode, after each cycle 3/3 + 3 sec., there is a 3 sec pause which is a protective time against overheating of the dental pulp. The light ring flashes and the device cannot be activated.
Page 10
BLUEDENT XPRESS cordless Dental curing light - LED module LED module indication: Blinking means that the battery is discharged - there is only 20% charge left, you have the option of 5-25 starts of 10 seconds to full discharge. 7. The handpiece is directed to the place designated for irradiation, as the tip of the device is brought as close as possible to the object of irradiation / 4 to 7 mm /, and after a few seconds.
Page 11
BLUEDENT XPRESS cordless Dental curing light - rare flashes of the output light from the lightguide - when 5-10% of the charge remains of the battery. Only a few cycles (5-10) remain until complete discharge. It can be used for polymerization as the intensity is stabilized.
BLUEDENT XPRESS cordless Dental curing light The battery must not be short circuited, mechanically damaged, immersed in water or to be heated or thrown into a fire. - Non-functioning batteries can be taken to battery collection points or returned to the device manufacturer.
BLUEDENT XPRESS cordless Dental curing light To avoid cross-contamination, it is mandatory to use disposable barrier sleeeve on the handpiece, new one for each patient. VII. WARRANTY CONDITIONS 1. Warranty period of BLUEDENT dental curing light is 24 (twenty four) months from the date of purchase.
Page 14
BLUEDENT XPRESS cordless Dental curing light 3.3 Claims due to improper or insufficient security and care, protection and security during transport, unpacking, relocation, operation and storage of the device are not accepted. The warranty is void for the above events.
Dental curing light IX. SYMBOLS Manufacturer BG LIGHT LTD, 155, Vasil Aprilov blvd., 4027 Plovdiv, Bulgaria Pursuant to Directive 2012/19/EU, this symbols shows that the product must not be disposed of as urban waste at the end of its operating life.
BLUEDENT XPRESS cordless Dental curing light X. FAQ Problem Solution No response by button starting Fully discharged battery. Need to connect to charger to begin charge. If button continues not to respond - send the device to service. The button does not respond...
Page 18
BLUEDENT XPRESS cordless Dental curing light the result is poor - send the device to the service. The patient feels discomfort during Need to cure at short cycles 10sec or less curing process especially during with short pauses 1-3sec. Sensibility is...
BLUEDENT XPRESS cordless Dental curing light XII. BLUEDENT DATA LOT: DATE OF PRODUCTION: DATE OF PURCHASE: Last revision: 01.09.2021 Follow www.bglight.com for updated revision of this Operating instructions manual.
Need help?
Do you have a question about the BLUEDENT XPRESS cordless and is the answer not in the manual?
Questions and answers