Table of Contents
Advertisement
SET UP & USE
BURST OR VERTICAL STEAM IRONING
Press the burst of steam button to generate a powerful burst of steam that
penetrates the fabric and helps to smooth creases. Wait a few seconds before
pressing again.
By pressing the burst of steam button at intervals you can also iron vertically, which
is ideal for curtains or hung garments.
DRY IRONING
For ironing without steam, follow the "STEAM IRONING" instructions, however, the
steam control knob should remain in the NO STEAM position.
SELF-CLEANING
NOTE: The self-cleaning feature cleans inside the soleplate, removing impurities. It is
recommended to be done every 10 to 15 days.
With the iron plugged in, set the steam control knob to NO STEAM position.
Fill the water tank to MAX level
Set the temperature control dial to MAX and wait for the indicator light to turn off.
Pull the power cord plug out of the wall socket, rotate the steam control knob to
SELF CLEAN position.
NOTE: In the Self Clean position, the steam control knob will elevate. Should you
happen to pull out the knob completely, simply place back in its original
position.
Then, press the self-cleaning button until the boiling water, steam and impurities
come out.
When the soleplate has cooled down, wipe it off with a damp cloth.
NO
STEAM
SELF
CLEAN
PUSH
DOWN
Page 7
Advertisement
Table of Contents
