Steam Ironing - W APPLIANCE Commercial Care CCSI800 User Manual

SET UP & USE

STEAM IRONING

Place the iron in a vertical position and set the temperature control dial at the
minimum/low heat setting.
Insert the plug into the socket and the power indicator light will illuminate. Then
turn the temperature control dial to the "MAX" mark. The pilot light will come on,
indicating that the iron is heating up.
When the pilot light turns off, the set temperature has been reached and the iron is
ready to use.
During ironing, the pilot light on the iron automatically switches on/off as the
thermostat maintains the set temperature. You may continue ironing during this
process.
Turn the steam control turning knob to the desired position. Steam will be produced
as soon as the iron is held horizontally.
SPRAYING
Press the spray button to spray water on clothes as often as required.
NOTE: When using the water spray function, ensure that there is enough water in the
water tank. You may have to pump the spray button several times the first
time you use the iron in order to start the spraying function.
Page 6
SELF NO
CLEAN STEAM
STEAM MAX
STEAM