Filling With Water; Setting Temperature - W APPLIANCE Commercial Care CCSI800 User Manual

SET UP & USE
OPERATION INSTRUCTIONS
BEFORE FIRST USE
It is normal for a small amount of smoke to be produced when using this product for
the first time. It will quickly disappear. When using the steam function for the first
time, do not direct steam towards the laundry as there could be debris emitted from
the steam vents.

FILLING WITH WATER

Make sure both the steam control knob and temperature control dial are in the MIN
position.
Hold the iron upright so that the water filling inlet is in a horizontal position. Fill with
water through the water filling inlet until it reaches the MAX mark indicated on the
side of the iron. Never fill above this mark.

SETTING TEMPERATURE

Follow the ironing instructions on the garment label. If there are no instructions and
you do not know the kind of fabric, please consult the table below.
NOTE: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate of the fabrics.
FABRIC
Silk
Wool
Cotton, Linen
TEMPERATURE CONTROL
Low temperature
Medium temperature
High temperature
•
••
•••
Page 5