Table of Contents
Advertisement
Operating Principals
The USA Lab UHC-7/20 is intended to provide a quick and simple way of keeping a precise temperature
fluid for your process. The cooling and heating systems work together to keep your process regulated to
the precise temperature that you demand. The pump can push your fluid up to 20L/min and as high as
5.6m or 18ft.
Notes / Warnings
WARNING: The unit gets hot at the lid of the bath and the sides. Do not touch these areas during
or after the unit has been running. Personal injury may occur.
WARNING: Do not exceed temperature rating. Damage to persons, or property may occur.
WARNING: Do not attempt to remove or replace internal parts.
WARNING: Do not use this device unattended or unobserved.
WARNING: Do not touch rotating parts. Personal injury will occur.
WARNING: If the unit has a malfunction, stop use immediately. Contact us for instructions to return the
unit for inspection and repair.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the UHC-7/20 and is the answer not in the manual?