novostella NTF36 User Manual page 9

Step B: Create an account on Smart Life and login.
Note: Please keep your account and password in mind for Alexa or Google Assistant App
painting later.
Step C: Add the light to Smart Life App
1. Tap "+" button on top right corner to add device, then tap "lighting devices" to
enter next page.
Wi-Fi Connection
This smart light supports 2.4GHz Wi-Fi network, not 5.0GHz. Please make sure your
working network is 2.4GHz, and your phone is connected to the require Wi-Fi network.
1. Power on the light with your own switch.
2. Observe how frequently the light blinks to identify which mode it is in.
Smart Life App supports two Wi-Fi connection, EZ (Easy) Mode and Access Points
•
(AP) mode. When in EZ mode, the light blinks rapidly (about 0.5s per blink), when
in AP mode, the light blinks slowly (about 3s per blink)
EZ mode is the easier wat for Wi-Fi connection. When the light is in AP mode, you
•
can change it to EZ mode by repeatedly turn on-off-on-off-on the switch to
activate the light into rapid blinking status (about 0.5s per blink) And please make
sure to keep an interval over 2 seconds between each turn-on and turn-off.
9