Accessibility - Sanyo FW43C47F Owner's Manual

Set the fun-Link control to On or Off. The following additional settings
will be grayed out when you set them to Off.
Off
fun-Link
control
On
This unit will turn on when the power on signal is sent from your
connected fun-Link device.
Off
Auto TV On
On
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit's remote control.
Off
Device control
On
Note(s)
Pause may not work properly on some devices even if they are fun-Link (HDMI CEC)
●
compliant.
HDMI-ARC allows you to use fun-Link to output TV audio directly to a
connected audio device, without the need for an additional digital audio
cable.
Off
HDMI-ARC
(HDMI 2 only)
On
Return your settings to default values
You can return settings to their default values.
1
Use H I to select Restore default settings, then press OK.
2
Use H I to select Reset AV settings or Reset all settings, then
press OK.
Return picture and sound settings to their default
Reset AV settings
values. The channel installation settings are not
affected.
Reset all settings Return all the settings to their default values.
Disables all fun-Link.
Selects if you have connected an
external device that is compatible with
the fun-Link function.
This unit stays in standby mode even
if you turn on your connected fun-Link
device.
This unit turns on automatically when
you turn on your connected fun-Link
device.
Disable Device control.
PLAY, PAUSE K t / STOP C /
FWD D / REV E / VOL + / – / D
(MUTE) / OPTIONS / H I J K / OK /
BACK / the NUMBER buttons can be
used to control your connected fun-
Link devices by this unit's remote
control.
Disable HDMI-ARC.
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.

Accessibility

1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Accessibility, then press OK.
Picture Voice guide
Sound Caption settings
Features Digital audio preferences
Installation
Accessibility
4
Adjust the following items.
Voice guide
Lets you configure voice guide and its settings.
1
Use H I to select Voice guide, then press OK.
Off
Voice guide toggle
On
Fast
Speed Normal
Slow
High
Pitch Normal
Low
Verbose
Verbosity
Succinct
Loud
Volume level Normal
Soft
33
To set Voice guide off
To set Voice guide on
Set voice guide speed based on
your preference
Set voice guide pitch based on your
preference
Set voice guide explanation
verbosity based on your
preference
Set voice guide volume based on
your preference
Continued on next page.
.
English