Advertisement
Tips for Getting the Best Coverage!
1.
Reduce the number of walls and ceilings between your Xplore
Wi-Fi Hub and other network devices.
2.
Place the Whole Home Wi-Fi Units at least 2 metres away from
electrical devices or components that generate interference like a
microwave oven, home security system or Bluetooth devices.
3.
Make sure any Whole Home Wi-Fi Units are placed no more than
10 meters away from the Xplore Hub unit.
4.
As much as possible, place the Xplore Hub in a central point
(or close to the central point) of the space to be covered, so
that distance from any Whole Home Wi-Fi Unit you are using is
reduced as much as possible.
xplore.ca/support
Visit
Managing your Wi-Fi Name and Password
1.
Open any web browser on your device
2.
Enter 192.168.219.1 in the address bar to access the Hub 5 login
screen.
3.
The username will be "admin"
and the password will be
"adminXXXX" where "XXXX"
is the last 4 digits of the
D-SN found on the sticker
on the back of the Hub.
4.
Once logged in, click on "Local network" on the top of the page,
then WLAN on the left hand side of the page. Here you can
change the "SSID" (the name of your Wi-Fi network name) and
the password used to log onto your Wi-Fi Connection
5.
Click apply to save your changes.
For further information:
xplore.ca/support/internet/
Go to
Started section.
for tips and tricks on using your Wi-Fi service.
XPL ORE H UB
and navigate to the Getting
|
E A SY S E T UP GU ID E
5
Advertisement
