Quick Start - ECD SmartDry SD Series Setup And Operation Manual

QUICK START

This Quick Start Guide is designed to help the user to familiarize
themselves with the equipment and perform basic setup. For de-
tailed information, please refer to the Setup and Operation Man-
ual.
The ECD SmartDRY™ Cabinet is ready to plug in and begin using as
soon as it is safely set up. No additional programming is required.
Once unpacked, here are some steps to quickly get your Cabinet
up and running.
Although pre-programmed, the Cabinet must run for a minimum
of 8 hours to acclimate and regenerate its dryer module. Please
allow this time before adding your filiment. Also, the alarm limits
have been pre-programmed however, are not enabled. Once the
Cabinet has stabilized at set point, the alarms can be enabled if
desired. You may also want to explore the other Alarms:
SmartDRY™ Temperature, SmartBAKE™ RH, and SmartBAKE™
Temperature, enabling them as you wish. Refer to section 9.1.2
Alarms (SmartDRY™) in the Setup and Operation Manual for de-
tailed information.
SmartDRY™ 3D Quick Start Guide | A62-3337-16 REV: 1.0.0 Page 2