Operators Safety Information - ECD SmartDry SD Series Setup And Operation Manual

OPERATORS SAFETY INFORMATION

The safety information in this section is for the benefit of operat-
ing personnel. Warnings and Cautions will also be found through-
out the manual where they apply.
The ECD SmartDRY™ Cabinet is ETL listed and self-de-
clared to meet the requirements of CE for the storage
of components at low relative humidity and tempera-
tures. It is not intended for the storage of flammable,
volatile or combustible materials. These units have
been tested per the requirements indicated in topic:
Declaration of Conformity.
Hardware changes or modifications to the ECD SmartDRY™ Cabi-
net or components are not expressly approved by ECD and could
void the warranty.
THE WARRANTY WILL NOT COVER DAMAGE CAUSED
BY NEGLECT OR ABUSE OF ANY ECD PRODUCTS. TO
MAINTAIN THE SAFETY FEATURES INCORPORATED,
OPERATION MUST BE IN STRICT COMPLIANCE WITH
THE REQUIREMENTS SPECIFIED HEREIN.
Make sure you have read and follow the
formation and
Setup and Operation Manual for additional information.
5.0 Setup & Installation
4.0 Operators Safety In-
recommendations of the