Advertisement
Available languages
Available languages
5. Installation
1.
Choose your mounting spot. Take the base as a template and drill the
necessary mounting holes. If necessary, drill a hole for routing the
cables. Insert a nylon plug in each hole.
2.
Loosen the joint lock for the bracket using the included hex wrench.
3.
Fix the bracket using the included screws. Adjust the camera lens and
aim it toward the surveillance area. Lock the bracket using the
included hex wrench.
6. Connection
1.
Connect the power terminal of the camera to a 12 VDC regulated
power supply.
2.
Connect the video output of the camera to the video input of your DVR
using a 75 Ω coaxial cable.
Remarks:
Only use a regulated 12 VDC power adapter. Using any other type will
damage this camera.
Protect the connectors against moisture by applying some insulating
tape over the connectors.
V. 02 – 08/05/2018
CAMTVI15
4
©Velleman nv
Advertisement
