Specifi cations ........14 The best recommended usage of the oscillating quick-dry nozzle ..10 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use. EH-NA67 AUS_EH9210NA677651.indb 3 EH-NA67 AUS_EH9210NA677651.indb 3...
Panasonic Holdings Corporation. WARNING A nanoe™ is a nano-sized ion particle coated with water particles. ►Plug and Cord Safety precautions Do not use with the cord bundled. - Doing so may cause fi re or electric shock.
Page 5
WARNING If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualifi ed persons in order to avoid a hazard. Disconnect the plug by holding onto it instead of - Failure to do so may cause an accident or injury. pulling on the cord.
Page 6
WARNING Do not immerse the appliance in water. Do not use this appliance near water. Do not use this appliance near bathtubs, showers, Do not leave the product with the power switch on. basins or other vessels containing water. - Doing so may cause fi re. - Doing so may cause electric shock or fi...
Page 7
CAUTION Never use the appliance with the fi lter removed. - Your hair may get dangled in the air inlet, which could damage the hair. ►To protect your hair Do not wash the fi lter in water. Do not use with the air inlet damaged. - Doing so may cause fi...
Parts identifi cation ►Concentrator nozzle Focuses and concentrates airfl ow for precise drying. ►Oscillating quick-dry nozzle Delivers strong and soft airfl ows for fast drying. Automatically moves to prevent hot spots for more gentle drying. Attach the oscillating quick-dry nozzle so this air outlet is vertical.
To defi ne the curls and waves with a diffuser How to use the hair dryer 1. Gently place the tip of your hair on the diffuser. Always check that the fi lter is securely attached before 2. Lift your curls up and down from your scalp using.
5. Dry your hair, then (Turn off automatic The best recommended usage of the turn off the automatic swing mode) oscillating quick-dry nozzle swing mode for the oscillating quick-dry Oscillating • The oscillating quick-dry nozzle will work only if you pull out nozzle before tidying quick-dry the nozzle (see arrow).
About nanoe™ Maintenance of the hair dryer Always turn the power switch off and disconnect the plug from What is nanoe™? the household outlet. (Except when performing maintenance on the air outlet) (nanoe™, generation method: high voltage discharge) nanoe™ is generated by collecting the available moisture in Maintaining the main body the air, so depending on the usage environment, nanoe™...
Page 12
2. Remove any dust etc. adhered to the fi lter or air inlet grille. Maintaining the nanoe™ outlet • Remove the dust etc. adhered to the outside of the fi lter using a vacuum cleaner. If this does not remove the dust, •...
Page 13
Maintaining the air outlet • The hair dryer should be plugged into the household outlet only in case of maintenance for the air outlet. • Use a commercially available toothbrush. • Switch the temperature selector to “Cool” and blow away the dust etc.
The nanoe™ outlet emits a noise (crackling noise). If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorised by Panasonic for repair. Specifi cations Product model EH-NA67 Power source...
Page 15
MEMO EH-NA67 AUS_EH9210NA677651.indb 15 EH-NA67 AUS_EH9210NA677651.indb 15 21/4/2565 BE 10:22 21/4/2565 BE 10:22...