Haier HW90-BP14959 User Manual page 20

7-Care and cleaning
7-5.1
Note: Hygiene
After long periods of disuse we recommended to run programme Drum Clean with no
load and small amount of detergent in washing agent compartment (2) or special m-
achine cleaner to remove possibly corruptive residues.
7-6.1
7-6.3
7-6.5
19
7 .5 Long periods of disuse
7-5.2
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 7-5.1).
2. Turn of water supply (Fig. 7-5.2).
3. Open the door to prevent formation of moisture
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leakage.
7-6.2
7.6 Pump filter
Clean the filter once a month and check the pump
filter
Scalding Risk! Water in the pump filter can be very
7-6.4
hot! Before any action please ensure water has co-
oled down.
1. Turn of and unplug the machine (Fig. 7-6.1).
2 . Push and open service flap (Fig. 7-6.2).
3. Provide a flat container to catch leach water
4. Pull the drain hose out and hold its end above the
5. Take the sealing plug out of the drainhose (Fig.
7-6.6
6. After complete drainage close drainhose (Fig.
7. Unscrew and remove counter clock wise the pump
8. Remove contaminants and dirt (Fig.7-6.6).
and odours. Let door open while not used.
f or instanvce if the appliance:
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
WARNING!
(Fig. 7-6.3). There could be bigger amounts!
container (Fig. 7-6.3).
7-6.3).
7-6.4). and push it back into the machine.
filter (Fig.7-6.5).