Table of Contents
Advertisement
Available languages
Available languages
Check before use
Checking installation
Check the required installation condition below.
f The installation area should be level, not sloping.
f
f The area near the air intake and air outlet should Be free from obstruction.
f
f The area should not be humid, nor have inflammable material nearby.
f
f The area should allow 15cm away from the wall.
f
Check the power plug and socket
f Use the power plug to 220 - 240 V socket only.
f
(When the appliance is plugged in, it will be changed to operation waiting status.)
f Unplug the appliance when in use.
f
Product information
f A vapor particle of air purifier with humidification function is so small that it is invisible.
f
f When the water in the tray smells bad or the color of the water changes, remove the water and then clean the tray.
f
f The temperature of air flow from the appliance is lower than ambient temperature.
f
f Humidification filter may generate odor but this is not a malfunction.
f
Clean the humidification filter and the tray and then operate the appliance again.
f When using the appliance for the first few times, white floating particles of dust might be found in the tray.
f
This is not foreign matter but fiber materials of the humidification filter. If the floating particles of dust are generated a lot,
clean the tray and then operate the appliance again.
Temperature range for operation of air purifier with humidification function
f Indoor temperature : approximately 6 °C~40 °C
f
f If the appliance operates out of its proper temperature range, it will not operate correctly.
f
Design information
f The wave pattern of upper cover is the patten of air flow, so it is not a faulty product.
f
f The appliance may look bent depending on viewing angle as its design of left or right side is asymmetrical.
f
Paper_AC347HPAWQ_IB_34547A-4_EN.indd 7
7
2013-07-31 오전 10:26:48
Advertisement
Chapters
Table of Contents
