First Time Auto Setup - Panasonic TX-55LZ2000B Operating Instructions Manual

First time Auto
Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
These steps are not necessary if the setup has been
≥
completed by your local dealer.
≥ Please complete connections (p. 13 - 16) and settings
(if necessary) of the connected equipment before
starting Auto Setup. For information about the settings
for the connected equipment, read the manual of the
equipment.
1
Plug the TV into a live mains socket
and turn the power on
Takes a few seconds to be displayed.
≥
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
Please select your viewing environment.
Home
∫ How to use the remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select your country
Select [Home]
Select [Home] for use in a home viewing environment.
[Shop] is for shop display.
≥
To change the viewing environment later on, the set
≥
will need to have all settings initialised by accessing
[Shipping Condition].
22
English
Set up the network connection
Tick the TV signal mode to tune, and then select
[Start Auto Setup]
≥
Select your region
Space Tune Adjustment
If tuning has failed check the Satellite cable, RF cable,
and the network connection, and then follow the on-
screen instructions.
≥
≥
≥
≥
≥
Shop
[Satellite Antenna Setup]
Ensure the satellite connections are completed (p. 14)
and select the tuner mode ([Dual Tuner] / [Single
Tuner]).
Auto Setup is now complete and the TV
is ready for viewing.
Note
The TV goes into Standby mode when no operation is
performed for 4 hours if [Auto Standby] in the Timer
menu is set to [On] (factory setting).
The TV goes into Standby mode when no signal is
received and no operation is performed for 10 minutes
if [No signal Power off] in the Timer menu is set to [On]
(factory setting).
To retune all channels
[Auto Setup] in [Tuning Menu] ([Setup] menu)
To add the available TV signal mode later
[Add TV Signal] in [Tuning Menu] ([Setup]
menu)
To initialise all settings
[Shipping Condition] in [System Menu] ([Setup]
menu)