ABB Infinity S Quick Start Manual page 12

QUICK START GUIDE
Converter
+24V Orange
•
Specifications and ordering information are in the Infinity S Ordering Guide available at
•
External Surge Protective Device (SPD) is required on all AC inputs.
•
Equipment and subassembly ports:
1. are suitable for connection to intra-building or unexposed wiring or cabling;
2. can be connected to shielded intra-building cabling grounded at both ends.
•
Grounding / Bonding Network – Connect to an Isolated Ground Plane (Isolated Bonding Network) or an Integrated
Ground Plane (Mesh- Bonding Network or Common Bonding Network).
•
Installation Environment - Install in Network Telecommunication Facilities, OSP, or where NEC applies.
•
Battery return may be either Isolated DC return (DC-I) or Common DC return (DC-C).
These documents are available at
Document Title
CC848815341 Galaxy Pulsar Plus Controller Family Product Manual Galaxy Pulsar Plus Controller Family Product Manual
Infinity S Power System Brochure Infinity S Power System Brochure
Pulsar Plus Modbus RTU Interface Quick Start Guide Pulsar Plus Modbus RTU Interface Quick Start Guide
850047312
Page 12
© 2021 ABB. All rights reserved.
NE075DC24A
abbpowerconversion.com
Input DC
Voltage Current
54A max
Output DC
1
Voltage
abbpowerconversion.com
Current
75A