Huawei SUN2000L-2KTL Quick Manual page 6

1.3 Installing the PE Cable for SUN2000-(2KTL–6KTL)-L1
Before connecting cables, ensure that the DC switch on the SUN2000 and all the switches
connected to the SUN2000 are set to OFF. Otherwise, the high voltage of the SUN2000 may
result in electric shocks.
• It is recommended that silica gel or paint be applied around the ground terminal after the PE
cable is connected.
• It is recommended that you connect the PE cable to the right ground point and reserve the
other ground point.
Installing the AC Output Power Cable to SUN2000-(2KTL–6KTL)-L1
1.4
Ground
point
5
AC output port (AC)