Huawei SUN2000L-2KTL Quick Manual page 3

3. Remove the DC connectors and use a cable cutter to cut off the terminals of DC input power
cables. Set the cables aside for future use.
•
The DC terminals of SUN2000L-(2KTL–5KTL) must be cut off. If the DC connectors of
SUN2000L-(2KTL–5KTL) are directly connected to SUN2000-(2KTL–6KTL)-L1, the SUN2000
may be burnt.
• If the SUN2000 is connected to a smart PV safety box, cut off the DC terminal connected to
the PV port on the SUN2000 and do not cut other DC terminals. Put the cables aside for
future use.
DC input terminals
Battery terminals (BAT+/BAT–)
4. (Optional) Remove the battery connectors, cut off the terminals with a cable cutter, and put
the cables aside for future use.
•
The method for removing battery connectors is the same as that for removing the DC
connectors.
• The battery terminals of SUN2000L-(2KTL–5KTL) must be cut off. If the battery connectors of
SUN2000L-(2KTL–5KTL) are directly connected to SUN2000-(2KTL–6KTL)-L1, the SUN2000
may be burnt.
5. (Optional) Remove the signal cable connectors from the COM and ALARM ports, and take
out the signal cables for future use.
If the SUN2000 is connected to a smart PV safety box, cut off the crimping terminal of the signal
cables and strip the cables for future use.
ALARM port
COM port
Cable
cutter
2
Cable
cutter